PRODUCT DATA SHEET
JY2130F / GY2130F
POLYURETHANE ADHESIVE
TWO-COMPONENT, SOLVENT-BASED
DESCRIPTION
●Superior bonding performance under 155 °C, with good resistance to impact, vibration, oil, temperature and fine water-tolerant, acid-tolerant, etc.
●Applicable to the composite of PET/NON-WOVEN FABRIC, PET/FISH PAPER, such as DMD, used for insulation material of electric motor and transformer, etc.
●Products conform to the National food safety standards (GB9685) and regulations of adhesive for food package stipulated by China adhesive industry association.
PHYSICAL PROPERTIES | ||
Type | JY2130F(Main agent) | GY2130F(Curing agent) |
Composition | -OH | -NCO |
Appearance | light yellow viscous liquid | Clear or light yellow viscous liquid |
Solid content (%) | 30±2 | 60±2 |
Viscosity at 25 °C(No.4 cup) | 40-160S | 15-90S |
Mixing ratio (quality) | 7-8 | 1 |
Shelf life (Months) | 12 | 12 |
Operation Conditions: To begin with the dilution by adding diluent into the Main agent as per required solid content, and mixing the solution entirely. Secondly adding the Curing agent into the solution with a good mixture should be made before it can be used. | ||
HANDLING PRECAUTIONS
Mixture ratio | 7-8:1:1-4 |
Diluent | Acetic ether, acetone (the water content<0.1%, none amine & alcohol.) |
Working concentration(%) | 22-25 |
Coating weight (g/m²) | 5.0-10 |
Laminating type | Dry lamination |
Tunnel temperature(℃) | 80-130 |
Curing temperature(℃) | ≥70 |
Curing time(h) | ≥24 |
PACKAGING
| JY2130F Main agent | 16 kg/Bucket; 180kg/Bucket |
| GY2130F Curing agent | 4 kg/Bucket; 20kg/Bucket |
STORAGE CONDITIONS
●The products are inflammable, should be transported and stored as dangerous articles. It should be stored in cool, dry, well-ventilated places. (The products must be handled with care in loading. )
INSTRUCTIONS
●The conditions like additives, corona treatment, coating layer, tension device and temperature controller are all decisive to the end use of the composite product, which will have direct or indirect influence on its operational performance.
●It’s needed to make a test for ensuring the suitability of the product before mass production.
you may consult our technical support for more details.
Hot Tags: solvent-based dmd insulation laminating adhesive, China, suppliers, manufacturers, factory, custom, wholesale, made in China, industrial lamination using custom pu adhesive, pu adhesive laminated industrial equipment for specific operations, pu adhesive for industrial product lamination for specific markets, adhesive lamination for packaging, solvent based polyurethane adhesive for plastic, Solvent Based Polyurethane Adhesive