What does the solid of polyurethane adhesive look like?

Apr 02, 2021

Leave a message

Polyurethane adhesives can be cured at room temperature. For reactive polyurethane adhesives, if it takes a long time to cure at room temperature, a catalyst can be added to promote curing. In order to shorten the curing time, heating can be used. Heating is not only conducive to the curing of the adhesive itself, but also conducive to accelerating the reaction between the NCO groups in the glue and the active hydrogen groups on the surface of the substrate. Heating can also soften the adhesive layer to increase the infiltration of the surface of the substrate, and is conducive to molecular movement, and find a "partner" that generates molecular force on the bonding interface.

Heating is beneficial to improve adhesion. Curing heating methods include oven or drying tunnel, drying room heating, fixture heating and so on. For metal substrates with fast heat transfer, clamps can be used to heat, and the adhesive layer is heated faster than the oven.

The heating process should be increased gradually. Solvent-based polyurethane glue should pay attention to the volatilization speed of the solvent. During the drying process, most of the solvent has been volatilized, and the remaining solvent slowly diffuses through the adhesive layer. If the heating is too fast, the solvent will vaporize and bubble in the softened adhesive layer, forming bubbles in the joint In severe cases, most of the uncured and viscous adhesive can be squeezed out of the joint, and the formation of vacancies will affect the bonding strength. For two-component solvent-free adhesives and one-component moisture-curing adhesives, the heating should not be too fast, otherwise the NCO group will accelerate the reaction with the moisture in the glue or the surface of the substrate or in the air, and the generated CO2 gas will not have time to diffuse, and the glue layer The viscosity increases quickly, and the bubbles remain in the glue layer.


Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!