Polyurethane adhesive contains isocyanate, which is extremely sensitive to moisture. When opening a barrel for the first time, it is necessary to ensure its covering and surrounding environment.
Allow the adhesive to reach the manufacturers recommended temperatures in the TDS before dispensing onto the metering rolls. Do not use the PU adhesive past the expired date. Generally 1 year from manufacture. Isocyanate will lose reactive groups over time and effect final curing and bond strength. Use only new static mixers at the beginning of each day or if the machine doesn’t run for longer than 45 minutes.
Gear pumps are capable of precise metering on a continuous basis but require attention to ensure they are operating properly and maintain a precise mix ratio throughout the run. Measuring the mix ratio manually by separating and weighing the two components individually to ensure the ratio is correct is important to do on a daily basis.
Mixing ratios for laminating adhesive should be set in the machine by volume. Each component will have volume ratio and a density on TDS, these should be confirmed with adhesive manufacturer. Temperature of the pots and hose are also important to ensure a smooth delivery of the adheisve and to maintain a consistent mix ratio, coat weight and adhesive appearance. Dispensing adhesive and running without allowing the adhesive to reach the manufacturer recommended temperatures can lead to coat weight issues and an orange peel appearance of the adhesive.
