Metal composite glue, also known as metal composite material glue, bimetal composite glue, explosion-free metal composite glue, is a polymer polymer glue.
Also known as metal composite material glue, bimetal composite glue, explosion-free metal composite glue, and high molecular polymer glue. It can be used for the composite between metal and metal, metal and plastic, density board, composite board, stone, ceramic, glass, etc. The typical use is stainless steel foil (plate) or copper foil (plate) and cold rolling in the metal door panel manufacturing industry. Composite of steel plate.
1. High adhesion, strong toughness: stamping and bending resistance, 5cm diameter sphere reverse stamping depth of 5mm or more, positive stamping depth of 8mm or more. It can bend over 90 degrees with a width of 5mm or less.
2. Suitable for assembly line production: Long service life (pot life) at room temperature: the pot life at 15 degrees Celsius can reach more than 24 hours, and the pot life at 25 degrees Celsius can reach more than 8 hours (the pot life can be adjusted as needed).
3. Convenient curing: the curing speed can be flexibly controlled according to different construction requirements: normal temperature curing (2-4 days) heating curing (120 degrees for 20 minutes, 150 degrees for 10 minutes, 200 degrees for 5 minutes, 300 degrees for 1 minute).
4. Good construction performance: roll coating, net coating, brush coating, spray coating, drip coating, curtain coating and other methods can be used for sizing.
5. The adhesive layer is strong and has good impact resistance: it can withstand the pitting test of a sphere with a depth of 5mm.
6. Wide range of applicable materials and wide range of bonding objects: it can be used for bonding glass, ceramics, iron, steel, aluminum alloy and other metals, wood, cardboard, leather, jade, stoneware, hard plastic, vulcanized hard rubber, etc.
7. Non-toxic, low irritation, safe to use, and good water resistance.
8. Transparent glue layer: Although the mixed glue is translucent, the glue layer will appear transparent when it reaches a certain thickness, so it can be used in situations where transparent and traceless bonding is required.
9. With good insulation properties, it can be widely used in electrical and electronic industries.
10. It can be used for surface coloring or insulation coating.
