Solvent-based Anti-Chemicals Polyether Laminating Adhesive

Solvent-based Anti-Chemicals Polyether Laminating Adhesive

Details
●Specially designed for lamination of PLASTIC/PLASTIC, AL/PLASTIC, VMPET film.
●Applicable to OPP/CPP, OPP/VMCPP, PET/PE, PA/PE structure, like puffed food packaging.
●Anti-slipping agent for PE film.
Category
Solvent Based Polyurethane Adhesive
Share to
Send Inquiry
Description
Technical Parameters

PRODUCT DATA SHEET

JM1170 / GM1170

POLYURETHANE ADHESIVE

TWO-COMPONENT, SOLVENT-BASED 


DESCRIPTION

●Specially designed for lamination of PLASTIC/PLASTIC, AL/PLASTIC, VMPET film. 

●Applicable to OPP/CPP, OPP/VMCPP, PET/PE, PA/PE structure, like puffed food packaging.  

●Anti-slipping agent for PE film. 

●Products conform to the National food safety standards (GB9685) and regulations of adhesive for food package stipulated by China adhesive industry association.  


PHYSICAL PROPERTIES

Type

JM1170(Main agent)

GM1170(Curing agent)

Composition

-OH

-NCO

Appearance

 light yellow viscous liquid

light yellow viscous liquid

Solid content (%)

70±2

75±2

Viscosity at 25 °C(mPa.s)

4000-8000

2000±1000

Solvent

Ethyl acetate

Ethyl acetate

Mixing ratio (quality)

20

5

Shelf life at 15 ~ 25°C(Months)

12

12



REFERENCED DILUTION RATIO(QUALITY RATIO)

Solid content of glue to be required (%)

35

30

25

Base (kg)

20

20

20

Hardener(kg)

5

5

5

Ethyl acetate(kg)

25.7

34.2

46



POT LIFE

●Ensure all well-prepared adhesive solution should be consumed in 8 hours, and the remained adhesive solution should not be used any longer in principle. In case there are a large quantites of the adhesive solution to be remained, it is possible to make use of ethyl acetate or fresh adhesive solution to dilute in multiple times and store in a cool and unopened condition. It can be reused by mixing with the newly prepared adhesive solution in a small quantities, but a calculation of mixture ratio and working concentration should be made before actual use.

●In case the adhesive solution in storage is in such conditions as white turbidity, translucent or obviously thickened, then it should no longer be used.

●It is necessary to consume the product in a short period of time if opened. (esp. the hardener, which is easy to be moistened and deteriorated, should be consumed in 24 hours. )


PACKAGING

JM1170 Main agent20 kg/Bucket
GM1170 Curing agent5 kg/Bucket


 

Hot Tags: solvent-based anti-chemicals polyether laminating adhesive, China, suppliers, manufacturers, factory, custom, wholesale, made in China, , Solvent based Laminating Adhesives, Solvent Free Polyurethane Adhesive

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!